About Clear Coatings
842-00 - SOMAY "ROOF MASTIC"® , Sealer and Protector - "CRYSTAL CLEAR" - "The New Roof in a Can"® - "Hurricane Proof Your Roof"® - "Shed's Water Like a Duck's Back"®
A Premium Quality, 100% Acrylic Resin-Based, Waterborne Coating for use on sloped/inclined surfaces to help Seal, Waterproof, Windproof, Protect & Preserve your roof. "ROOF MASTIC" is a waterborne, heavy-duty, exceptionally durable, clear, non-yellowing coating that will seal, waterproof, protect and preserve roof surfaces, including asphalt/fiberglass roof shingles, curved Spanish clay barrel tiles, flat concrete tiles, etc. Also available in "Energy Star"® White and 5 stock colors. Use SOMAY Product No. 777, Premium "PST" (below) as Primer under Product No. 842-00, "ROOF MASTIC" "CLEAR". Product No. 842-00 has all of the features and benefits of SOMAY Product No. 777. However, instead of being a thin viscosity like water to be able to penetrate into the open pores, cracks and crevices of surfaces, Product 842-00 has a thick viscosity like paste, so the applicator can build the desired 20 mils DFT per coat or the 40 mils DFT for two coats necessary to achieve waterproofing, windproofing and hurricane proofing benefits. Dries "Crystal Clear". See "Waterproofing Coatings" for more information. At 48% Vol. Solids = 750 sq.ft./gal./mil DFT = 3¢/sq.ft./mil DFT.
777 – SOMAY "PREMIUM" "PST" – PRIMER/SEALER/TOPCOAT
A Premium Quality, 100% poly-acrylic, waterborne, universal, all-purpose, exterior and interior, clear, non-yellowing coating that can be used as a Primer, a Sealer and a Topcoat or Finish Coating. It has excellent resistance to ultraviolet (sun) light degradation, excellent adhesion to practically every properly cleaned and prepared surface, and dries to a hard finish that has excellent resistance to wear due to normal pedestrian traffic. No solvents, no fumes … exceptionally user and environmentally friendly. "PST" will NOT "blush" or turn "white" if moisture develops under the coating, but will remain clear. Because SOMAY "PST" will always "breathe", it allows moisture vapor to escape through the cured coating film. "PST" can be applied to concrete, stucco, masonry, non-glazed porous brick, stone, concrete blocks, coral rocks and other porous decorative façade materials, wood shingles, wood siding, wood decks, docks or porch floor surfaces, wood paneling (interior and exterior), metal including aluminum, copper, brass, zinc, galvanized steel or primed tin or ferrous metal. "PST" can be used on practically any well-drained roof surface, including wood shingles, split cedar shakes, asphalt shingles, fiberglass shingles, concrete tiles, clay tiles, barrel tiles, 90-lb. slate, roll roofing, etc. Over 20% Vol. Solids = 200 sq.ft./gal./mil DFT = only 7¢/sq.ft/mil DFT.
787 – "PREMIUM" ACRYLIC LATEX HIGH GLOSS VARNISH
A Premium quality, 100% acrylic, waterborne, heavy-duty, industrial strength, exceptionally durable, clear, non-yellowing, exterior/interior varnish that will protect, preserve and help retain the natural color and beauty of wood and other substrates. No. 787 is resistant to fresh water, salt water, boiling water, mild alkali, mild acids, alcohol, detergents and severe weather, including ultraviolet rays from the sun. User and environmentally friendly. It has no solvent vapors or odor, so it is safer to use, especially in enclosed areas. Over 43% Vol. Solids = 692 sq.ft./gal./mil DFT = only 3¢/sq.ft/mil DFT.
770-756 – SOMAY HEAVY DUTY POLYURETHANE MARINE VARNISH
Premium quality, heavy duty, industrial grade, single component, solvent borne (mineral spirits), polyurethane-based marine varnishes especially formulated to give an exceptionally hard finish that helps to protect, preserve and retain the natural beauty and color of wood. Resistant to severe weather, fresh and salt water, boiling water, dilute acids, alcohol and normal marring or scuffing. Available in 3 distinct formulations:
No. 770 – Exterior High Gloss with Ultraviolet Light Absorber - Over 41% Vol. Solids = 671 sq.ft./gal./mil DFT = only 5¢/sq.ft/mil DFT.
No. 756 – Interior High Gloss - Over 41% Vol. Solids = 661 sq.ft./gal./mil DFT = only 4¢/sq.ft/mil DFT.
572 – SOMAY WATER REPELLENT/WOOD SEALER/COATING
Premium quality, alkyd (oil) based, solvent borne (mineral spirits) water-repellent/wood sealer/coating for exterior/interior use on unpainted porous wood surfaces when a water-repellent coating is desired. It provides a clear, protective moisture barrier to resist water penetration into the pores of the wood. Far superior to nationally advertised competitive water-repellent products. Over 22 % Vol. Solids = 361 sq.ft./gal./mil DFT = only 4¢/sq.ft/mil DFT.
775-00 - SOMAY CONCRETE & POROUS SURFACE CLEAR SEALER
Seal and protect both interior and exterior concrete surfaces. This high quality acrylic silicone sealer is used to seal all properly cured and prepared porous concrete and similar masonry, brick, coral, slate and stone surfaces. It penetrates, seals, dries rapidly and is unusually durable. No. 775 is exceptionally resistant to: weathering, fading, dusting, mild acids & alkalis, detergents, gasoline, motor oils, alcohol, water and normal wear. Solvent borne (xylene). Expect approx. 100 sq.ft./gal. for the first coat on a porous, but smooth surface. Coverage may be more for 2 nd coat.
1) Cedar Porch Ceiling with SOMAY Clear Coating
2) Pool Deck Pavers Sealed with SOMAY Clear Coating #775
09930 - Stains and Transparent Finishes
09 93 00 - Staining and Transparent Finishing
09 93 13 - Exterior Staining and Finishing
09 93 13.13 - Exterior Staining
09 93 13.53 - Exterior Finishing
09 93 23 - Interior Staining and Finishing
09 93 23.13 - Interior Staining
09 93 23.53 - Interior Finishing