News  

Industrial Fall Protection Equipment: Railguard 200 Guard Rails & Safety Barriers

 
  Subscribe to FREE newsletter  Feb 07, 2010

Industrial safety demands barriers to guard hazardous equipment and materials, guard rails to serve as fall protection equipment, mezzanines, stairs and platforms. Machine guarding with the Railguard 200 system is easy. No holes to drill, reconfigures easily, set it up – take it down in minutes.

The Railguard 200 Fall Protection System sets up in minutes
Garlock offers many types of fall protection equipment for perimeter protection of machine work areas. Our Railguard 200 Portable Railing System is the perfect answer to setting up a perimeter guarding system in a matter of minutes. The cast iron base plates eliminate the need for expensive core drilling of concrete floors to mount railings. The Railguard 200 base plates are simply positioned around the perimeter of the work area, railings are inserted into the base plates and pinned together. That’s it! On concrete surfaces we recommend using rubber pads on the bottom of the base plates. These self-adhesive pads are factory applied to the bottom of the base plate to minimize skidding or shirting of the base plate. Our unique serrated pad design holds the base plate in position on just about any smooth surface out there. If you need to form a circle around a machine area you can use our C-Clamp attachment on the base plate that allows you to turn a railing in any direction you want and then clamp into position. Our safety barriers set up in minutes with ease!

We carry both manual and self-closing gated Guard Rail solutions
We also offer access gate in manual or self-closing models. Our manual model gates have a support wheel on one end and come in widths of 4’, 5’ 10’ or 12’ lengths. Custom sizes are available too. Manual gate can be setup to open in or out and right or left. They work in the Railguard 200 base plates as well as permanent mount bases. Our self-closing gates feature automatic closure assisted by a gas strut. Sizes available are 3’, 4’,5’, and 6’ widths. If using a self-closing gate with the Railguard 200 base plate we recommend using a gate width of 5’ or greater.

Other Fall Protection & Safety Applications:

For other relevant searches, you might want to try:
(41 67 16) Plant Fall Protection Equipment