About StoneLite®CAD details
StoneLite™ panels are composite wall panels made up of a thin natural stone veneer reinforced with an aluminum honeycomb backing. The stone veneer can be almost any stone including granite, marble, limestone, slate and sandstone.
Combining the aerospace technology of aluminum honeycomb with the timeless beauty of natural granite, marble and limestone, StoneLite™ can be used for a wide variety of applications including those typically considered weight or cost-prohibitive. They have been used extensively in exterior, interior, renovation, elevator, and specialty applications.
StoneLite™ weighs only 3.3 lbs./sq. ft. (16 kg/sq. m) about the same as 1/4-inch (6 mm) thick glass, which is approximately 80% less weight than solid stone. This weight savings alone provides huge savings in installation labor, structural requirements, and installing time.
Tough, durable StoneLite™ panels offer fantastic impact resistance and flexural strength provided by our patented manufacturing process. They can resist up to 60 times more impact than solid 3 cm thick granite. These panels can be flexed making them ideal for seismic locations. Our aluminum honeycomb-reinforced panels keep the beauty of natural stone and eliminate its fragile, brittle properties.
StoneLite™ is impervious to water penetration, even with open structured stones such as travertine, Indiana limestone and French limestone. The fiber-reinforced epoxy skin, directly behind the stone, provides a waterproof barrier, thereby eliminating the need for a secondary layer of protection.
StoneLite™ has been subjected to, and has passed numerous severe structural tests following accelerated aging and large-scale fire tests. Minimal strength loss was experienced following freeze-thaw cycling while immersed in a 4 pH sulfuric acid solution. Resisting large missile impact and 1,342 repetitions of simulated dynamic hurricane loading are testimonials to the strength of this lightweight natural stone panel. See our testing section for more details.
UCSD’s Otterson Hall Is Embraced By StoneLite Panels (Jul 26, 2016)
Defying Deadlines: McCarran International Airport, Las Vegas (Apr 16, 2016)
Stone Panels at Robert T. Matsui Courthouse, Sacramento California (Dec 3, 2015)
StoneLite Panels Successfully Pass NFPA 285 Standard for an Open Joint System (Feb 17, 2015)
Spotlight on StoneLite by Stone Panels Inc. (Mar 3, 2014)
StoneLite® from Stone Panels International LLC Remains Dependable Choice For Insured Durability (Apr 30, 2012)
Stone Panels International LLC Captures Environmental Vision of Business Owners (Dec 10, 2011)
StoneLite® Panels featured on Award Winning Project (Jan 17, 2011)
Natural Stone Cladding Using Modern Technology (Aug 12, 2010)
Weight watchers (Jan 16, 2009)
04400 - Stone
04410 - Stone Materials
04420 - Collected Stone
04430 - Quarried Stone
04800 - Masonry Assemblies
04850 - Stone Assemblies
06200 - Finish Carpentry
06220 - Millwork
07430 - Composite Panel
07440 - Faced Panel
07450 - Fiber-Reinforced Cementitious Panel
07480 - Exterior Wall Assemblies
04 40 00 - Stone Assemblies
04 42 00 - Exterior Stone Cladding
06 20 00 - Finish Carpentry
06 20 13 - Exterior Finish Carpentry
06 22 00 - Millwork
06 61 00 - Simulated Stone Fabrications
07 41 43 - Composite Roof Panels
07 41 63 - Fabricated Roof Panel Assemblies
07 42 00 - Wall Panels
07 42 43 - Composite Wall Panels
07 42 63 - Fabricated Wall Panel Assemblies
07 44 00 - Faced Panels
07 44 13 - Aggregate Coated Panels
07 44 16 - Porcelain Enameled Faced Panels
07 44 19 - Tile-Faced Panels
07 44 63 - Fabricated Faced Panel Assemblies
07 46 63 - Fabricated Panel Assemblies with Siding
For other relevant searches, you might want to try: StoneLite, StoneLight.